Henry W Stone

54409160, Aug 15, 1995

Nov 15, 1993

8/153934

Henry W. Stone - Altadena CA
Timothy R. Ohm - La Crescenta CA

The United States of America as represented by the Administrator of the
National Aeronatics and Space Administration - Washington DC

B25J 1900
H04N 710

73 2331

A mobile, self-powered, self-contained, and remote-controlled robot capable of safely operating in a surrounding combustible atmosphere and providing information about the atmosphere to the operator. The robot includes non-sparking and non-arcing electro-mechanical and electronic components designed to preclude igniting the combustible atmosphere, and positively pressurized enclosures that house the electro-mechanical and electronic components of the robot and prevent intrusion of the combustible atmosphere into the enclosures. The enclosures are interconnected such that a pressurized gas injected into any one of the enclosures is routed to all the other enclosures through the interconnections. It is preferred that one or more sealed internal channels through structures intervening between the enclosures be employed. Pressure transducers for detecting if the pressure within the enclosures falls below a pre-determined level are included.

54433541, Aug 22, 1995

Jul 20, 1992

7/917554

Henry W. Stone - Altadena CA
James W. Lloyd - Pasadena CA
George A. Alahuzos - Sierra Madre CA

The United States of America as represented by the Administrator of the
National Aeronautics and Space Administration - Washington DC

B25J 500

414729

A simple or unsophisticated robot incapable of effecting straight-line motion at the end of its arm inserts a key held in its end effector or hand into a door lock with nearly straight-line motion by gently thrusting its back heels downwardly so that it pivots forwardly on its front toes while holding its arm stationary. The relatively slight arc traveled by the robot's hand is compensated by a compliant tool with which the robot hand grips the door key. A visible beam is projected through the axis of the hand or gripper on the robot arm end at an angle to the general direction in which the robot thrusts the gripper forward. As the robot hand approaches a target surface, a video camera on the robot wrist watches the beam spot on the target surface fall from a height proportional to the distance between the robot hand and the target surface until the beam spot is nearly aligned with the top of the robot hand. Holes in the front face of the hand are connected through internal passages inside the arm to an on-board chemical sensor. Full rotation of the hand or gripper about the robot arm's wrist is made possible by slip rings in the wrist which permit passage of the gases taken in through the nose holes in the front of the hand through the wrist regardless of the rotational orientation of the wrist.